Software Downloads

Thank you for the recent purchase from Axiom Precision. You may have received a message along with the tracking info for your order, indicating that your recent purchase requires a specific post processor. Below is a list of the available Post Processors. Please make sure that you locate the correct file for the items you purchased. Instructions for the install of these Post Processors can be found at the very bottom of the list.

AR4/6/8 Basic and Pro series machines

• Axiom_HHC_CNC => Normal 3-Axis operation of standard VCarve/Aspire tool-paths files.
• Axiom_HHC_4th => Required for 4th Axis machining.
• Axiom_HHC_PVC => Specific post for Photo VCarve. *Must be installed in PhotoVCarve only*
• Axiom_HHC_Laser => Laser Post operates On/Off of laser as needed for file operations.

Axiom Elite AR8/AR16 machines

• Axiom_Elite_CNC => Normal 3-Axis operation of standard VCarve/Aspire tool-path files.
• Axiom_Elite_Laser => Laser Post operates On/Off of laser as needed for file operations.
• Axiom_Elite_Drag => Used for Drag Knife operations.
• Axiom_Elite_PVC => Specific post for Photo VCarve. *Must be installed in PhotoVCarve only*
• Axiom_Elite_4th => Required for 4th Axis machining.

To load these Post Processor files (VCarve or Aspire)

1. Open the software, click File and select to Open “Application Data Folder”.
2. Click and drag, or copy (Crtl+C) and paste (Crtl+V) the files into the PostP folder.
3. Once you have moved the file …if the software is currently running you will need to close and restart it before it will appear in the Post Processor list when saving your toolpath/s. *The MyPost folder can be used in place of PostP*
4. If you choose to do this, the only Post Processors that will be available to select in the software will be those that have been loaded into the MyPost folder. All others will be ignored.